A few simple steps will teach you how to clean the car

Many car owners take car washing as fun. Wash the car by yourself, study how to remove stains and keep the paint clean. It can not only increase the "communication" of your car, but also save a lot of money every year. It's really killing two birds with one stone. However, you should pay attention to several points when washing the car yourself.

1. The engine hasn't cooled down, so you can't wash the car immediately. Because the temperature of the engine hood just stopped is very high, if it is washed with water at this time, the aging of the paint will be accelerated.

2. Don't wash the car in the sun. Because the paint temperature is too high, the water on the paint surface evaporates quickly, and the water droplets on the body will leave spots, affecting the cleaning effect.

3. Without washing the car body with clean water, it is not allowed to wipe the car body directly with rags. The dusty rag will rub on the paint surface constantly, causing the car paint to be scratched, and eventually the paint surface will become "scarred".

4. Don't use a bucket of water to the end. Some people have the good habit of saving water, but it is better not to be too "stingy" with their car, because after washing the cloth several times, there will be a lot of dust and impurities in the bucket, resulting in damage to the paint surface in the process of wiping the car body, which outweighs the loss.

5. Do not add detergent randomly. It is not recommended to use laundry detergent, detergent and inferior soap when cleaning the car body, because these detergents contain alkali, which may damage the grease in the paint and accelerate the aging of the paint.

Car washing steps:

1. Pre spray the wheel hub and tire parts with special automobile cleaner. Dilute the car washing liquid 1:10 into PA foam bottle to cover and spray the whole vehicle. Pay attention to the chassis and wheel arch mudguard parts. Wait for the foam to hang for about 3-5 minutes, and the pre washing can remove most of the sand and dirt on the body surface, reducing the chance of scratches. After sagging, wash the whole vehicle, pay attention to the distance between the water gun and the paint surface, and avoid spraying at a short distance due to high water pressure.

2. Brush the door hinge, guide channel, fuel tank cover, door frame, etc. with the special car cleaner and car detail brush. The accuracy of brushing can be improved by pinching the bristles at the edge seams. After brushing, wash with atmospheric pressure water immediately.

3. Dilute the car wash solution 1:400 into a bucket, put it into the filter element, and then use a water gun to make foam. Put another bucket into the filter element to prepare clear water. Use Chenille car wash gloves to dip in diluted car wash solution in the bucket to wipe and clean the upper part of the car body in a straight line to avoid repeated wiping at the same part. After cleaning 1-2 pieces of sheet metal, clean them in the clean water bucket in time. You can stick the car washing gloves on the dust collection filter element to rub, so that the sand and stone can fall to the bottom. In the same way, clean the lower wall of the vehicle body, and then clean the lower wall after cleaning the upper wall of the vehicle.

4. Use the special cleaning agent for automobile to cover and spray the four wheel hubs first, and use the special Cleaning Brush for tires to clean the wheel hubs and tires. Note: The Car Wash Brush should be made of soft materials to avoid scratching the paint surface during the washing process. After cleaning a group of wheel hub tyres, wash them in time, and then proceed to the next wheel hub tyre cleaning. After scrubbing, wash the whole vehicle. Use a large water collecting towel to collect the body water to avoid water stains on the body.